This time I just didn’t have time to make a full princess dress, who does when the kids are little? So last minute I used a plain tutu dress that actually has paint stains I couldn’t get out on it! Don’t worry, they get covered up!
Then I ordered a special mermaid appliqué with the number 5 for my daughters birthday off of Etsy. I also had some leftover sequin fabric I wanted to add to the dress.
I used the sequin fabric and sewed it all
Around the bottom inner layer of the dress. Then I added the patch and wow what a difference with that easy change! I was going to add some puff sleeves but the weather was warm so I ended up keeping it sleeveless.
Purchased an assortment of gem heart stickers and used fabric stitch glue to place them on the dress!
This can be done easily and quickly and you have a birthday dress! You can add sleeves, bows, a sash or belt!
My daughter loves running around in her cat mask saying she’s Cece cat. She also wanted to be Cece dinosaur, cece giraffe, and many other cece animals. So I had a couple extra crafting materials nearby and we created these easy masks! Also, masks are great for parties or as a craft at a party!
There are many ways to make many different masks, the first way is simply with
1) popsicle sticks or tongue depressor sticks (or you can use elastic or string)
2) construction paper
3) scissors and glue
4) crayons, ribbons, stickers or any other decoration you would like to add
I absolutely love this new glue I got from crayola, it is so easy for my toddler to use herself and its washable!
I simply held the construction paper up and estimated where the eye holes needed to be and cut them out then made my own design and let her glue the pieces together and decorate! Such a simple and easy project for your little one.
Now if you are looking for a particular pattern or don’t know how to make an animal let me suggest a couple tutorials I found:
Animal masks by Hoosier
These cute masks are perfect for your little fall creature! There’s a pattern for them too!
Next are easy felt masks that are perfect for Halloween costumes!
Superhero cape time! You can make an easy superhero cape in less than 15 minutes! My daughter needed to be distracted in a fun way while I needed to care for her baby brother, so we pretend to be superheros who fetch diapers, plastic bags, and bottles for baby brother! Also, her dolly had to have a super cape too! So I went to the fabric store and found the perfect superhero fabric! The fabric has a great design and also is very stretchy and does not fray easily. I also bought double sided bias tape in gold for the outside. Her dolly also needed a superhero cape so I designed a small one for dolly.
As usual, there is a written and youtube tutorial for this cape. I only used one side of material but you can easily do two fabrics (this is outlined below). Enjoy!
What you need:
1) Fabric (one or 2 different cuts 1/2 yard each)
2) Velcro or your preferred method to connect
around neck
3) Optional: Bias tape and/or monogram
You can decide on the best size by either knowing your childs height and how wide you would like it, or you can always look at their clothes! I do outline the length and design in my video and written tutorial.
I made the cape for my 2.5year old but it ended up being very big, big enough my German Shepard dog could wear it! The sizes I use could most likely fit up to a 4t. Fold 1/2 yard of fabric in half. Measure long way 26inches long (this was a bit big for my 2.5yr old but still worked) and cut straight across. If you are using two fabrics (one for front and one for back), repeat this whole cutting process.
Then measure about 4 inches down from the 26inch top and cut in and up for the connecting part of the cape (mine was a bit big for my 2.5 year old but she will grow into it!)
If you are using two fabrics take both sides and cut and then face each other and sew all the way around except leave a 3 inch opening (as with all other projects with two fabrics). Then pull the fabric through the hole and sew hole shut (make sure you push out corners).
Next, I took the bias tape and sewed all the way around (pinning it first).
Lastly, I ironed on the Velcro sections with the softer side facing on side downwards (that way if its too big at one point it is not rough on the skin). You can also use snaps or any other closing you would like.
And that is it! Pretty easy just eyeball the size or you can measure your little one! Enjoy!
I don’t know about your little one, but mine sure does love to read! Well at this age, it is more like browse through the pages and pictures! She sits by the book shelf and pulls out book by book looking at each page.
At first I thought maybe I should purchase her a bean bag chair, and then I thought, well lets just make one! This can also be a great gift for anyone! I actually sometimes sit in it too (shhhh!)
So of course I have the video tutorial on youtube below and then the written and picture tutorial below that. Let me know if you have any questions!
What you need:
Fabric (you can use two or one color) 2 yards total of each color (or 4 yards of one color)
A 24 inch zipper (or you can use velcro or buttons)
4 yards of muslin or cheap fabric
Bean bag filling (100L) (I couldn’t find a large bag at my local craft store so I bought mine on amazon with free shipping)
Make panels of 40×16 inches. You should do 6 outside (3 of one color and 3 of the other color) and 6 inner panels.
Take one of your panels and fold once long way and once width. Have your fold on top and side when measuring to cut. Measure bottom to 6 inches (the long side) and start a curve and cut right up to the right corner. See picture below.
Line up two inside pieces and sew up and down one side. I did this twice for more strength. For the outside you will have the patterns facing inside towards each other and sew.
Once sewn open the panel up. Then place another panel on the original piece and sew the opposite side (you will end up with three pieces sewn together)
Then sew the other 3 inside pieces together and you will have two sets of three.
Take the two sewn together pieces and face pattern side in (doesn’t matter with the inside bean bag layer) and sew all the way around the outside leaving a couple inches hole.
Turn right side out. Then you will put the bean bag filling it! Ah what a challenge!
Note: I did not completely fill and sew this until I was sure the outside would fit over properly. I waited to finish this until the end of the project.
Take one of your outside panels and face the zipper down on the pattern. Line it up on your machine and sew the zipper on.Take one of your outside panels and face the zipper down on the pattern. Line up the right outside part of the zipper to the outside of the panel (as shown) and sew the zipper on.
See the video for more of a demonstration on how to attach a zipper
Sew pattern and right side of the next panel to zipper right sides facing each other (inside) and sew together.
Line up the part below and above the zipper with patterns facing each other and sew
Then sew your 3rd panel on…complete another 3 panels together as done with the inside pieces.
**Open your zipper all the way. Take each 3 piece panel set and place them facing each other (inside) and sew all the way around the edges. Do not leave a hole this time, you will pull it out through the zipper opening!
Next you will place your inside bean bag that is partially full inside. If its full then you are done! However, if you partially filled…continue to fill all the way and sew the inside bag shut.
Congrats you are done! Enjoy! Post your pics below!
Cece bear loves to pull toys out of baskets and put them back in. She also likes to build blocks and figure out other puzzles. So I thought to myself, what can I make for Christmas that she can play with? And a mini Christmas tree came to mind. Eventually, I figured out a felt Christmas tree with all sorts of sensory stimulation and Velcro ornaments would work! So I decided to get to work.
I decided to make three trees, one for each of Cece’s friends. It also made a great birthday gift for her friend Kyle’s first birthday! This is a great activity to do with older children as well. They can make their own ornaments and decorate the tree! There are a variety of ways to put the tree, ribbons, buttons, and ornaments together. The two I used were sewing and hot glue gun, but you can do one or the other as well. Just make sure if you have a baby, infant, or toddler, to make sure everything is very secure so they can’t pull it off!
As always, there is a youtube video and written steps and pictures. Feel free to add your own creativity and pizzazz!!!
If you have an older child, instead of using velcro to stick the ornaments on, you can use string or twine looped on the ornament and they can put them around buttons on the tree!
What you need:
*Green felt fabric (I used 1.5
yards for three trees)
*velcro
*Brown felt fabric (stump)
*Felt fabrics of various colors for
ornaments of your choice and design
*optional: buttons, ribbons,
and other accessories
1) Fold your green felt and make a tree outline on the fold (so half of it traced on). Then cut your tree out!
2) Next, if you want a stump, use brown fabric to cut one out! Once again you can trace it out. You can either sew it on the bottom or hot glue gun.
3) I wanted to make something to hold the ornaments besides just having them stick to the tree. So I decided a present with the child’s name on it would be perfect! So next I chose a color of felt I had and cut about 11x 7 inches.
4) Next, for one of the presents I made I wanted the bow long ways down so I sewed a piece of ribbon straight down the piece. (the other two I made have it across the box which you can sew on now or later)
5) The next step would be to turn it right sides facing inwards and sew to the length you want so you have the top of the present flap long enough. Check out the picture to see what I mean. Then turn right side out.
6) As you can see, I decided to iron on letters for the name of the child. These two presents are different sizes. Also, if you want to put a piece of iron on or sew on or glue gun on Velcro to the top of the present to have it stick now is the time.
7) Then decorate the present at will. I added some adhesive Rudolph stickers. I did hot glue them so they would be more secure.
8) Follow that, I sewed the present onto the tree. This is optional, you can have it separate or not have a present at all. I opened the top flap and sewed right along the fold to the tree. You can also hot glue gun it.
8) Now, back to the tree. Now is the time to get even more creative! Use ribbons, garland, buttons, or whatever you want on the tree! You can sew or hot glue gun them on. If you have an older child and want to have hanging ornaments on buttons then align your buttons!
9) Next, it is time to make ornaments. If your child is older they can help decorate and make ornaments. I chose actually Christmas items and one ornament and one light bulb. I used whatever felt scraps I had to make them. I also made a star at the end. Remember to Velcro your ornaments on the back using the hard side of the Velcro. You want to iron them on before you decorate the front! Otherwise you might melt or damage your decorations.
To hang the tree, I used 3m adhesive strips, but I have heard that the blue paint tape works well on walls. You can also use suction cups if its on the window or door. Ok enjoy! Feel free to post your tree below!
So I didn’t want the same old fancy dresses for Christmas that take FOREVER to make and are uncomfortable. Therefore, I strolled around the fabric store looking for inspiration. A tan plaid red and green pattern caught my eye. For some time I have wanted to make a plaid dress for my little one, but haven’t found the right fit. However, today, I thought to myself, “How about a comfy hooded dress in plaid?” And so, the Christmas Plaid dress was born!!!
I designed the dress myself, so be patient with the video since sometimes I change my mind after completing part of the dress. Oh, you’ll see what I mean when you watch it! As always, there is a youtube video tutorial and a written and picture form. The dress pattern is listed below and is a sketch I made of it. There are several sizes on there, but you can always adjust it by measuring your little one or making it bigger or smaller by moving the lines.
Optional: ribbon, bias tape, buttons, felt, any other decorations, Velcro for hood
Lets get started!
Print the pattern and cut out the right size (note: make sure it is the right size for your little one by measuring)
Cut your fabric patterns out as instructed (decide if you want a hood and if you want it detachable. Also decide if you want long sleeves or no sleeves)
You can serge or zigzag stitch around all the pieces of fabric to prevent fraying.
After zigzaging or serging, sew the top part of the pocket on the main pocket
parts
If you want a button on your pocket sew them on now before you attach it
Next, make sure you align your pockets on the dress front by measuring in from the sides and from the top and bottom to get them as even as possible.
You can either fold your pocket edges and sew either a straight or zigzag stitch around the pocket leaving the top open, or you can just stitch around it as I have done since I liked the look for the plaid dress.
For the hood, have the pattern facing each other on the inside and sew the rounded edge!
Flip right side out and hem or add bias tape to outside
You can sew your hood on fabric pattern facing fabric pattern and sew across and flip right side out, or you can use buttons or velco. You will need to either make button holes or put velcro on the back of the dress to hold the hood. I used iron on velco. Note**If you are sewing it on wait until after you sew the front to back**
The front collar of the dress needs to be hemmed or sew bias tape on it
Next, is to sew the front to back of the dress. If you want the top of the dress to be velcro as well, you can have a jumper (but you wouldn’t have sleeves so skip the sleeve part).
To sew it together, turn patterns facing each other and sew . Also line up sides and pin and sew down underneath the sleeve opening. Then turn right side out.
If you are not doing sleeves, you want to hem or use bias tape on the sleeve holes after sewing down the side. If you are not doing sleeves then hem or use bias tape around the bottom and you are all done!
If you are doing sleeves, turn pattern facing pattern and sew. Then turn right side out.
Sew the sleeve sides together by facing pattern side to pattern inside. Do not sew the curved part as pointed to in the picture below. Then turn right side out
Turn your body of the dress inside out. Have your sleeve right side out. Place your sleeve inside the body with the curved open part lining up with the
armhole. Sew around.
This picture shows that you want the sleeve facing downward inside the body of the dress. the larger end to the hole and the smaller end (where the hand comes out) facing downwards.
You can hem or use bias tape on cuffs of sleeves and bottom of dress. Then add any embellishments you want and wah-la you are done!
I wanted that special 1st birthday dress, but not that especially high price that comes with most of them! So once again, I searched pinterest, etsy, and other sites to find ideas. I ended up combining ideas, as well as making up my own, to design with the dress I created. The theme was rubber duckies for her party. Therefore, I wanted to incorporate duckies as well as other birthday fabrics. I went to the store and examined numerous fabrics, buying a yard of my favorites! The extra fabric I ended up using to create the crowns!
I purchased the iron on birthday 1 and ducky from etsy. The number is even personalized with her name! I also bought the duck buttons from the store. I used white hair bands that I cut to make the loop holes for the buttons on the top of the shoulders.
So how did I make this dress? Well that’s a secret! But I can give you some hints. If you are truly interested in a dress like this you can private message me or come back and look for my future etsy link!
The skirt of course took the longest because of the detail. I added yellow ribbon in between the rows as well.
Then I added the cute duck to the back of the dress. Personally, this dress could be used as a 2 in 1 dress because the back is also so cute! However, the 1 in the front personalized this as a 1st birthday dress.
Well check out the other tutorials, as well as the 1st birthday party theme page for more ideas! Feel free to share pictures of your little one’s first birthday dress!
Want to sew quick and easy crowns for a party or get together? Then you’ve come to the right place! I made a last minute decision days before my daughters’ first birthday party that we needed crowns! The theme was rubber ducky, so I decided to make birthday crowns instead of hats! Young kids and babies don’t enjoy hard hats on their head and also shouldn’t have a rubber band or elastic around their neck.
As you can see they are very cute for photo shoots as well! She didn’t particularly like keeping it on, but I got a couple good shots!
As usual, there is a YouTube video and also a written explanation below. I didn’t have a lot of time to embellish the other crowns but you can always spice things up with some ribbons, bows, glitter, rhinestones, or buttons!
To get started you need:
1) Choice of fabric and design
2) Scisscors
3)Thread
4) Closure for crown (velcro, button, ribbon) or you can sew all the way around if you know the exact size
Cut your fabric for the main part of the crown 4 1/2 x 18 inches
Make your own crown pattern by drawing the top on a piece of paper and cutting it out!
Cut your design onto your fabric to make the shape of your crown! If you want a felt backing with another color cut that out as well.
Next, pick out your ribbon if you are using one, if you want any other embellishments get them ready! I made a felt duck that I sewed onto
the crown.
Line up your crown pieces and sew all the way around! Then you are done! If you want to add button loops and buttons you can sew them on as well.
Congrats and enjoy the party! Check back often for new crafts or subscribe below!
In one of my last tutorials, I showed you how to make a super cute sleeper. Now, here are the matching slipper shoes!
What you will need:
Fabric of choice
1/4 or 1/8 inch elastic
Thread color of choice
Optional: buttons or bows
I used a free pattern from marked crafts- > shoepattern
So lets get started! here is the video tutorial and below that is the written and picture format.
Cut your pattern out and decide on your color/colors you want to use (you can use two colors!
Cut out your pieces- there should be 4 of each piece
Take your upper pieces (the two sided rounded pieces) and place them pattern facing pattern as usual.
Then sew the non-rounded part only (the bottom of it)
Turn right side out, then iron you piece down with the right sides out and sew a nice little line across the outside where it is sewn together.
7. Take your heel pieces (the long rectangles), and place the pieces facing eachother (as usual) and sew just down one long side
8. Cut your elastic to 4 inches long (2 pieces). Pin it to one end of the sewn heel piece.
9. While sewing stretch the elastic and sew using your zigzag stitch across the length of the fabric
10. It will be curled up as shown above. Turn right side out. Pin and sew below the elastic and all the way around the whole piece to make it look nice and then trim as needed.
11. Place sole pieces together with patterns facing eachother, use a basting stitch (set your stitch to longest number and do not backstitch).
12. Pin together the heel and the front piece, adjust it to be the appropriate size for the baby/infant you are making it for.
13. Sew straight across where you already have the previous sewn line from the front piece. Then trim the rest off. This makes a nice neat line when you are finished.
14. Find the middle of the sole and the middle of the top part. You can do this easily by folding in half. Line them up together and pin. (the back of the sole is the smaller part). Have the top part the wrong side still out to pin.
15. Now sew all the way around! Almost done! Doesn’t it look so cute?
16. Trim the excess fabric being careful not to cut too close to your thread line.
17. Now turn right side out! And WA-LA you are done! You can add a button, ribbon, or any other accessory you want! Great JOB! Lets see those pictures
Ever love that oh so cute baby sleepers with the elastic on the bottom? I sure do, in fact I miss them now that my little one is getting older! However, I have many showers to go to and it is a great gift! The slip on sleeper with the elastic on the bottom is great for babies because you can easily change the babies diaper without fussing with all the buttons, snaps, or zippers. It also keeps the baby warm and comfortable; not to mention how cute he or she will look!
First off, you need the pattern. For this one, I used a neighboring sewing blog’s pattern since there are so many out there:
3. Fold your bias tape on the ends of the sleeves, pin on
and sew straight on both sleeves. Do this also to the neckline of the front and back piece.
4. Next, You want to overlap your front and back gown pieces by either looking at the mark you made from the pattern or you can measure 4 inches of overlap from the top down. So you want to pin and sew the overlapping sides (the 4 inches)
5. Find the middle of the overlap and the middle of the sleeves. This can be done by measuring 2 inches in for the overlap or folding. The sleeve can be folded as well if you didn’t mark it. Line up the middle of the sleeve and middle of the overlap place pattern on pattern and pin and sew.
You have to bunch it and pin it for it to stay.
6. Turn your sleeper inside out and pin from the bias tape bottom all the way down to the bottom of the sleep. Then sew!
Almost there!
7. Turn inside out and make elastic casing by folding up the bottom 1/4 inch for 1/8elastic or 1/2inch for 1/4elastic. Iron or pin the area to make it easier to
sew. Don’t forget to leave a 1-2 inch opening to put the elastic through!
Remember to back stitch!
8. To get your elastic through use a safety pin on the end and put in the opening
and pull through by bunching the fabric and then pulling the safety pin.
9. Choose the tightness you need for your little one on the bottom and then sew your two pieces of elastic together. Then sew the opening closed!
That’s it! Congrats you have finished! Great job. Any suggestions questions please let me know. Look for the next post to be the matching slippers!
