christmas gift – Cecelia's Spot

DIY Romper Time!

I decided it was time for the classic romper tutorial to come out. I decided to make my first one with a free pattern of dinosaurs for my little cute nephew for his first birthday! Now the size is 2-3t since he is not so little. But you can easily adjust the pattern to your little ones size, just size it up with one of your little one (or big ones) outfit and adjust! Easy Peazy!

Here are the parts of the free pattern..this is a 2-3t however just hold up a onesie or romper to the pattern and adjust for smaller or larger!

Also see the photo with the pieces cut out or the tutorial to see how they go together if you can’t tell!

pieces

2. TopBody

3. BodyMain

4. BottomMain

And here is the link to the youtube tutorial as always!

Here is the written one besides what is written on the tutorial:

What you need:

Fabric choice 1-2 yards depending on size. I used flannel fabric
If you want an alternate color/fabric for for neckline and bottom (a stretcher fabric is best)
Snaps/buttons/or velcro depending on what you want to use

Steps:

Cut out fabric pieces as written out on the pieces.
Take one main body piece and find the center by folding in half and one neckline piece (and fold it in half and mark the middle) and place pattern facing
pattern and stretch and sew. Look at the pictures below to see how you need to stretch it and sew (it is not easy if you are a beginner but it just takes practice! Also, if the neckline is a stretchy fabric it is much easier)
Line center to center
This is the end result, do for both main pieces
Turn to the backside of the main body piece and fold up and iron the seam line as shown below. Then fold the top down and iron to make it easier to sew and pin.
Turn it right side and either change pins to the front or be careful and take pins out as you sew bottom of collar
Sew both necklines like this then we will create an envelope neckline.
You are going to line up your front and back body piece with finished necklines and measure from the top of each side 1 to2 in down and this is where the top of one side touches the other side and you pin together (this may not be true if you need a bigger opening or smaller based on head size, adjust opening based on head size). Pin this on both sides
Fold sleeve piece in half and line up middle of sleeve piece (the curved part facing outwards as shown) and where the collar intersects with pattern facing
down and stretch and pin (see pics)
Then sew using a zig zag stitch (which keeps it strong). Do this for both sides and it will look like…

I then added double sided bias tape, for convenience and time saving, to the outside of the sleeve edge.

19. Body pieces and sleeve pattern facing pattern, pin around sleeve and down straight to bottom again I used the zig zag stitch. Then I trimmed the sides. Then you can iron it out.

20. Turn your project to the backside and take your football piece and fold in half and line up middle of football with middle of opening pattern facing pattern, pin middle and stretch and pin around then sew. Make sure the front piece is pushed out of the way (you don’t want to sew it shut! Just sew onto the back piece

21. Take two of your leg banding strips and line up pattern facing pattern and sew the outside 1/8th straight stitch and then do this for the other two as well and turn right side out and iron.

22. The binding piece ends up in the inside and it is used for the buttons or snaps (you can alternatively use fusible interface)

23. Next take your one banding piece and line it up with the front bottom with the fold on the inside and then stretch and sew (see video if this is too confusing!) You pin the outside and sew 1/8th zig zag around

24. Now you will sew 1/4 inch around (the white part as shown will now be in the inside after you do step 23.

25. Next (phew we are getting there- keep going!) is the back banding strip, Same method for the back piece, except you just sew the one time and not the second sew around as in setp 24 because of the flap (you will see what I mean after you do the first sew.

26. I hemmed the bottom leg openings and then did my snap buttons using the hammer method! I used thick material for the banding which I regret (also that it was not stretchy!) I had to use bigger than normal snaps to get it through the fabric!

Congrats you did it! Let’s see some pics!

Follow
Share

DIY Bandana Drool Bib

Once the drool starts it doesn’t stop! I saw an adorable bandana drool bib in a store and thought, I could easily make that! And you can too! It is a simple 5 to 10 minute project that makes a great gift and a fantastic accent and cute and functional accessory for your little one.

As always, there is a youtube tutorial and the written steps on here! Hope you enjoy!

This is for size 6months to 12months.

What you will need:
1) Two Fabrics (one side needs to be absorbent). I used a cute flannel fabric and then a yellow fleece material for the back.
2) Velcro or snaps to hold it shut

Fold your fabric in half. Cut out two triangles, one with each fabric (you can use my measurements or compare to your bib size for your little one) . I used the measurements of 9in long and 7 1/2in on the fold.
Next, you are going to make a cut for the neckline about 3 inches in from the side
and 2 inches down the fold.
Cut the little triangle off the very end, abut half an inch, this is where the velcro will connect.
Take pattern side facing pattern side and sew all the way around leaving a small
opening around 2 inches (this is where you will pull it right side out)
Now pull it right side out and hand sew the hole shut and VOILA! drool bib
complete!
Iron press it! You can also go around the whole outside and sew it if you like for the design look!
Next you want to attach either your velcro or snaps. I have iron on velcro I used.

Hope you enjoyed this tutorial, if you have questions just post! Thanks

Follow
Share

DIY Felt Christmas Tree!

Cece bear loves to pull toys out of baskets and put them back in. She also likes to build blocks and figure out other puzzles. So I thought to myself, what can I make for Christmas that she can play with? And a mini Christmas tree came to mind. Eventually, I figured out a felt Christmas tree with all sorts of sensory stimulation and Velcro ornaments would work! So I decided to get to work.

I decided to make three trees, one for each of Cece’s friends. It also made a great birthday gift for her friend Kyle’s first birthday! This is a great activity to do with older children as well. They can make their own ornaments and decorate the tree! There are a variety of ways to put the tree, ribbons, buttons, and ornaments together. The two I used were sewing and hot glue gun, but you can do one or the other as well. Just make sure if you have a baby, infant, or toddler, to make sure everything is very secure so they can’t pull it off!

As always, there is a youtube video and written steps and pictures. Feel free to add your own creativity and pizzazz!!!

If you have an older child, instead of using velcro to stick the ornaments on, you can use string or twine looped on the ornament and they can put them around buttons on the tree!

What you need:
*Green felt fabric (I used 1.5
yards for three trees)
*velcro
*Brown felt fabric (stump)
*Felt fabrics of various colors for
ornaments of your choice and design
*optional: buttons, ribbons,
and other accessories

1) Fold your green felt and make a tree outline on the fold (so half of it traced on). Then cut your tree out!

2) Next, if you want a stump, use brown fabric to cut one out! Once again you can trace it out. You can either sew it on the bottom or hot glue gun.

3) I wanted to make something to hold the ornaments besides just having them stick to the tree. So I decided a present with the child’s name on it would be perfect! So next I chose a color of felt I had and cut about 11x 7 inches.

4) Next, for one of the presents I made I wanted the bow long ways down so I sewed a piece of ribbon straight down the piece. (the other two I made have it across the box which you can sew on now or later)

5) The next step would be to turn it right sides facing inwards and sew to the length you want so you have the top of the present flap long enough. Check out the picture to see what I mean. Then turn right side out.

6) As you can see, I decided to iron on letters for the name of the child. These two presents are different sizes. Also, if you want to put a piece of iron on or sew on or glue gun on Velcro to the top of the present to have it stick now is the time.

7) Then decorate the present at will. I added some adhesive Rudolph stickers. I did hot glue them so they would be more secure.

8) Follow that, I sewed the present onto the tree. This is optional, you can have it separate or not have a present at all. I opened the top flap and sewed right along the fold to the tree. You can also hot glue gun it.

8) Now, back to the tree. Now is the time to get even more creative! Use ribbons, garland, buttons, or whatever you want on the tree! You can sew or hot glue gun them on. If you have an older child and want to have hanging ornaments on buttons then align your buttons!

9) Next, it is time to make ornaments. If your child is older they can help decorate and make ornaments. I chose actually Christmas items and one ornament and one light bulb. I used whatever felt scraps I had to make them. I also made a star at the end. Remember to Velcro your ornaments on the back using the hard side of the Velcro. You want to iron them on before you decorate the front! Otherwise you might melt or damage your decorations.

To hang the tree, I used 3m adhesive strips, but I have heard that the blue paint tape works well on walls. You can also use suction cups if its on the window or door. Ok enjoy! Feel free to post your tree below!

Follow
Share

Hooded Dress (Christmas Theme)

So I didn’t want the same old fancy dresses for Christmas that take FOREVER to make and are uncomfortable. Therefore, I strolled around the fabric store looking for inspiration. A tan plaid red and green pattern caught my eye. For some time I have wanted to make a plaid dress for my little one, but haven’t found the right fit. However, today, I thought to myself, “How about a comfy hooded dress in plaid?” And so, the Christmas Plaid dress was born!!!

I designed the dress myself, so be patient with the video since sometimes I change my mind after completing part of the dress. Oh, you’ll see what I mean when you watch it! As always, there is a youtube video tutorial and a written and picture form. The dress pattern is listed below and is a sketch I made of it. There are several sizes on there, but you can always adjust it by measuring your little one or making it bigger or smaller by moving the lines.

What you will need:

The pattern found here–> dress.jpg
Fabric (around 1 yard)
Thread
Sewing machine and scissors
Optional: ribbon, bias tape, buttons, felt, any other decorations, Velcro for hood

Lets get started!

Print the pattern and cut out the right size (note: make sure it is the right size for your little one by measuring)
Cut your fabric patterns out as instructed (decide if you want a hood and if you want it detachable. Also decide if you want long sleeves or no sleeves)
You can serge or zigzag stitch around all the pieces of fabric to prevent fraying.
After zigzaging or serging, sew the top part of the pocket on the main pocket
parts
If you want a button on your pocket sew them on now before you attach it
Next, make sure you align your pockets on the dress front by measuring in from the sides and from the top and bottom to get them as even as possible.
You can either fold your pocket edges and sew either a straight or zigzag stitch around the pocket leaving the top open, or you can just stitch around it as I have done since I liked the look for the plaid dress.
For the hood, have the pattern facing each other on the inside and sew the rounded edge!
Flip right side out and hem or add bias tape to outside
You can sew your hood on fabric pattern facing fabric pattern and sew across and flip right side out, or you can use buttons or velco. You will need to either make button holes or put velcro on the back of the dress to hold the hood. I used iron on velco. Note**If you are sewing it on wait until after you sew the front to back**
The front collar of the dress needs to be hemmed or sew bias tape on it
Next, is to sew the front to back of the dress. If you want the top of the dress to be velcro as well, you can have a jumper (but you wouldn’t have sleeves so skip the sleeve part).
To sew it together, turn patterns facing each other and sew . Also line up sides and pin and sew down underneath the sleeve opening. Then turn right side out.
If you are not doing sleeves, you want to hem or use bias tape on the sleeve holes after sewing down the side. If you are not doing sleeves then hem or use bias tape around the bottom and you are all done!
If you are doing sleeves, turn pattern facing pattern and sew. Then turn right side out.
Sew the sleeve sides together by facing pattern side to pattern inside. Do not sew the curved part as pointed to in the picture below. Then turn right side out
Turn your body of the dress inside out. Have your sleeve right side out. Place your sleeve inside the body with the curved open part lining up with the
armhole. Sew around.
This picture shows that you want the sleeve facing downward inside the body of the dress. the larger end to the hole and the smaller end (where the hand comes out) facing downwards.
You can hem or use bias tape on cuffs of sleeves and bottom of dress. Then add any embellishments you want and wah-la you are done!
Congrats! Feel free to post your pics below!

Follow
Share

Crib Rail Protector! GRR

One day I put my little munchkin down to nap and a couple minutes later I go to check on her and she is gnawing the crib side rail! And you know how expensive cribs are, so I was not a happy camper. I was also concerned about the stain getting in her mouth. So, I got right to work making a crib rail cover and protector! So far, she has only gnawed on the one rail, and that is because this rail faces the hallway that she enjoys looking out and crying to see if anyone will come to her rescue!

This is a simple project that should take no more than 15 to 20 minutes. As always, I have a Youtube video and a written and picture explanation.

What you need:
Fabric with your chosen pattern
Batting (fleece or any type of padding)
Ribbon
Measuring tape

First you want to measure your crib rail that you will be making this for. Measure the inside from side to side for the length and then the width and add 2 inches (or measure downwards for how long you want it to go down).
Also measure where your ties will tie onto your railing. Mark this all down so you remember.
Then cut the length and width of the fabrics and also cut your ribbon. Now you may want to make your ribbon longer for bigger bows but keep in mind your little one may pull at them if they are too long. I recommend about 6-8 inches long. I used 6 pieces of ribbon (so 3 ties) total for the side rail.
Pin your ribbon onto your batting facing inwards. Have the two ribbons across from each other and make sure to measure out the spots. Pin them down with the shiny side or pattern side up.
Line up your other fabric piece with right side down (right sides facing eachother).
Now you want to sew all the way around the edges leaving a 2 to 3 inch opening. Make sure you backstitch!
Pull the inside out and make sure the corners are popped out. Then sew this area shut.
You are done congrats! Go put it on and save your crib!

Follow
Share

Baby Slippers Tutorial!

In one of my last tutorials, I showed you how to make a super cute sleeper. Now, here are the matching slipper shoes!

What you will need:

Fabric of choice
1/4 or 1/8 inch elastic
Thread color of choice
Optional: buttons or bows

I used a free pattern from marked crafts- > shoepattern

So lets get started! here is the video tutorial and below that is the written and picture format.

Cut your pattern out and decide on your color/colors you want to use (you can use two colors!
Cut out your pieces- there should be 4 of each piece
Take your upper pieces (the two sided rounded pieces) and place them pattern facing pattern as usual.
Then sew the non-rounded part only (the bottom of it)
Turn right side out, then iron you piece down with the right sides out and sew a nice little line across the outside where it is sewn together.

7. Take your heel pieces (the long rectangles), and place the pieces facing eachother (as usual) and sew just down one long side

8. Cut your elastic to 4 inches long (2 pieces). Pin it to one end of the sewn heel piece.

9. While sewing stretch the elastic and sew using your zigzag stitch across the length of the fabric

10. It will be curled up as shown above. Turn right side out. Pin and sew below the elastic and all the way around the whole piece to make it look nice and then trim as needed.

11. Place sole pieces together with patterns facing eachother, use a basting stitch (set your stitch to longest number and do not backstitch).

12. Pin together the heel and the front piece, adjust it to be the appropriate size for the baby/infant you are making it for.

13. Sew straight across where you already have the previous sewn line from the front piece. Then trim the rest off. This makes a nice neat line when you are finished.

14. Find the middle of the sole and the middle of the top part. You can do this easily by folding in half. Line them up together and pin. (the back of the sole is the smaller part). Have the top part the wrong side still out to pin.

15. Now sew all the way around! Almost done! Doesn’t it look so cute?

16. Trim the excess fabric being careful not to cut too close to your thread line.

17. Now turn right side out! And WA-LA you are done! You can add a button, ribbon, or any other accessory you want! Great JOB! Lets see those pictures

Follow
Share

Sew An Easy Baby Sleeper!

Ever love that oh so cute baby sleepers with the elastic on the bottom? I sure do, in fact I miss them now that my little one is getting older! However, I have many showers to go to and it is a great gift! The slip on sleeper with the elastic on the bottom is great for babies because you can easily change the babies diaper without fussing with all the buttons, snaps, or zippers. It also keeps the baby warm and comfortable; not to mention how cute he or she will look!

First off, you need the pattern. For this one, I used a neighboring sewing blog’s pattern since there are so many out there:

Stitched Together Pattern

So print your pattern making sure you unclick the fit to page (you want it letter size).

What you need:
*Fabric of chose
*Thread
*Elastic 1/4inch or
1/8inch
*Optional: bias tape (can
also make or just hem)

Below is the link to the Youtube video tutorial. Below that is written instructions with pictures…enjoy!

Print your pattern. Cut your fabric as instructed on pattern

You should now have one front and one
back piece, and two sleeves.

2. Next, you use your bias tape. If you don’t have bias tape you can hem the ends instead or you can make your own bias tape. Here is directions to make your own bias tape

3. Fold your bias tape on the ends of the sleeves, pin on
and sew straight on both sleeves. Do this also to the neckline of the front and back piece.

4. Next, You want to overlap your front and back gown pieces by either looking at the mark you made from the pattern or you can measure 4 inches of overlap from the top down. So you want to pin and sew the overlapping sides (the 4 inches)

5. Find the middle of the overlap and the middle of the sleeves. This can be done by measuring 2 inches in for the overlap or folding. The sleeve can be folded as well if you didn’t mark it. Line up the middle of the sleeve and middle of the overlap place pattern on pattern and pin and sew.

You have to bunch it and pin it for it to stay.

6. Turn your sleeper inside out and pin from the bias tape bottom all the way down to the bottom of the sleep. Then sew!

Almost there!

7. Turn inside out and make elastic casing by folding up the bottom 1/4 inch for 1/8elastic or 1/2inch for 1/4elastic. Iron or pin the area to make it easier to
sew. Don’t forget to leave a 1-2 inch opening to put the elastic through!
Remember to back stitch!

8. To get your elastic through use a safety pin on the end and put in the opening
and pull through by bunching the fabric and then pulling the safety pin.

9. Choose the tightness you need for your little one on the bottom and then sew your two pieces of elastic together. Then sew the opening closed!

That’s it! Congrats you have finished! Great job. Any suggestions questions please let me know. Look for the next post to be the matching slippers!

Follow
Share

2 Ways to Make an Easy Headband!

Need a stylish way to keep the hair out of your face? Want it cheap? Well, believe it or not, you can sew a quick headband in almost under 5 minutes! This is great to match your little one’s dress or outfit. Also, you can match your own outfit or dress for a stylish design. I made a neat flower dress for my munchkin and made myself a matching headband! It looks great for pictures but it’s not the overboard matching outfits :op

Here’s how:

What you need:

Fabric (15×3 two pieces or 15 x6 or one piece folded)
Matching Thread
Elastic (1/4-1/2 inch)

1) First you want to cut out your fabric. You can either make the headband with two pieces of fabric at 15×3 and cut on a slant. Or you can do one piece with the fold on the long side (the 15 inch long side).

2) Following that you want to turn it with fabric sides facing each other and sew the sides (or side if you are folding) and leave ends open. Turn inside out.

3) Fold the ends inwards.

4) Cut your elastic to 7 inches long (or if for younger you can measure ear to ear in the back and cut elastic)

5) Put elastic in end and sew up and down several times ! If you are doing the folded headband then take the corners of the fabric and fold in and sew.

6) And wala! You are done! Don’t be afraid to add buttons, glitter, bows, and other neat accessories!

Awesome! Quick and easy, Enjoy and check back for more activities each week!

Lastly, do you think having matching outfits to your little one is too much? I’d like to see the debate begin!

Follow
Share

Creating A Photo Pillow

Looking for that perfect gift for someone? Maybe for a holiday or special occasion? Possibly a housewarming gift? Or maybe just an I’m thinking of you gift, the photo pillow is a perfect easy sewing project! The pillow below always gives my little one a smile when she picks it up on the couch! I know my husband enjoys it too because sometimes I find drool on it :op

Follow the You-tube tutorial here:

You can also follow along here:

For this tutorial you will need:

Freezer paper the size of a piece of printer paper (8.5×11″)
Computer and printer (choose your photos or photos)
Fabric (sizes vary on size of the pillow you would like)
Sewing machine and accessories
Poly-fill
Iron

1. Start by cutting a piece of freezer paper to the size of a piece of a paper (8.5×11′). Also cut the piece of fabric you are going to print the photo on to that size. Remember you most likely want to print on a light thin colored fabric so the picture stands out.2. Next, take your fabric you want the photo printed on and put it on your ironing surface with the side you want the photo printed on down. Then put your freezer paper shiny side down against the fabric. Have your iron on medium high and iron on top of the freezer paper. You can also turn it over and iron the fabric with the freezer paper on the bottom. Do not leave it on one spot too long or the fabric will develop a burn mark. Make sure the corners are well ironed and the sheet should stick to the fabric.

3. Take the fabric and freezer paper that are now one to your printer. Place it in the paper tray and print your photo. Make sure there aren’t any loose strings hanging on the side of your fabric, this could catch in your printer. Also make sure you put your paper in the way your printer will print on the fabric and not the freezer paper. If you are unsure, take a piece of regular printer paper and mark one side. Put it in the tray and check and see which side it prints on.

4. Once you have your photo printed, you can easily peel off the freezer paper. You can save the freezer paper to use one or two more times; quite economical if I should say so myself! Then, if you are planning on putting the photo fabric on a larger piece of fabric to have a bigger pillow, you want to fold a hem around the edges of your fabric and pin and sew it onto the larger piece of fabric. Below is an example.

However, if you would like to make a small decorative pillow (the size of a piece of paper), you would skip this step.

5. Next take your photo fabric or front of the pillow and place it facing side up. Take the back fabric for your pillow and place it on top facing in. So now the fabric pieces you want to be on the outside of the pillow are now facing the inside. Pin them together. Then you want to stitch all the way around the outside except for a three inch opening. So make sure you back-stitch when you start and end. I suggest you do not do this on the corner because it will be harder to hand sew at the end. This opening will be used to turn the pillow right side out and then stuff with poly-fill.

6. After sewing, turn it right side out. Stuff it with poly-fill to your desired fullness.

7. Now you will have to decide what stitch you want to use to close it. You can close it on the machine however it will be noticeable. You can do the regular loop stitch which is easiest. Another option which is used in my video is the blind stitch. The blind stitch is used for hems and closures that you want “blind.

8. And Viola! You are finished, congrats and enjoy!

Follow
Share