Princess Dress and Party!

My daughter has recently developed an interest in princesses and playing dress up. I decided to take on the challenge of sewing a princess dress. I’ve made many dresses, including the princess-like 1st birthday dress, but I wanted to make something different, so I did some research and then bought fabric I thought she would love, and designed a dress. I made several adjustments during the process and added embellishments.

Since I did this all during the process of making it, I decided to take pictures instead of video like I usually do.

There is no pattern for this since I designed the dress as I went. I used one of her regular party dress to eyeball the correct sizing for a 3t dress. (This is what you can do too!)

So below are pictures and some steps. If you want to design a similar one just use a dress to get an idea of the sizing. I don’t work with a lot of tulle sewing, so it didn’t turn out the best, but I’m proud of the end results, and she loves it too!

So I first made the front and two back pieces. You can copy these shapes from the picture and use a dress for sizing.

I ended up making another three pieces (another front and two back pieces) and using it as the inside of the dress. So I took pattern facing pattern for the front piece and left a 3 inch space to pull it right side out. Then I sewed this shut and ironed it all. I also used sparkly elastic and pinned it in between the pattern facing pattern (this is what I should have done but forgot and ended up just sewing it to the top).

I also added a tulle happy birthday and two pieces of silver design on the front. You can add or not add as many embellishments as you want.

Next, I used interfacing ironed on both back pieces and then used white hair ties cut in half. I pinned the half hair ties facing inwards in between the pattern facing pattern pieces then sewed all the way around except a 3 inch area and pulled it right side out and sewed then ironed it.

Following that, I placed the two back pieces on the front pattern piece and sewed the sides and then folded them back to have the top finished.

I then measured the skirt by measuring from the top down to the right length for my daughter with a measuring tape. I used the soft fabric of the top for the under-skirt and then cut happy birthday tulle and tulle for the skirt. i made the white tulle width three times the width length since I will gather it to make the skirt more “poofy.” I then gathered the tulle using the easy method of dental floss, on top of the soft under skirt. With this method, you use a large zigzag over the floss and then at the end you pull the floss out and it is gathered!

Next I decided to use the happy birthday tulle and sewed it on as well. Then, I put the layers together and I put pattern facing pattern and sewed it all together.

I ended up sewing on a bead embellishments on ribbon in between the top and bottom.

Happy Sewing!

Follow
Share

Summer Bee Dress

Cecelia’s Summer Bee Dress

This lovely summer spaghetti strap dress was suppose to be made in time for my sister in laws baby shower in June. However, I was unable to finish it due to my water breaking early and being hospitalized. I finally finished it and love how it turned out! I free handed the design and sizing. I meant for it to end up as a 2t size, but as you can see it’s a bit big! This works out great since its winter and not summertime! She can wear it this upcoming summer. I can’t wait for the warm spring and summer to come! Bulbs and flowers emerging and gardening time, but let’s get back on track.

As always there is a youtube tutorial and this written one. I do not have a pattern as a freehanded it and designed the pattern myself as I went. I used one of my Cece’s dresses to size it and make part of the pattern to guess the sizing.

Unfortunately, a lot of the video tutorial was accidentally videotaped over with my baby boys arrival home (sorry more important anyways!). So I videotaped again trying to explain the best I could. If you have questions please let me know! More great videos to come soon!

What you need:

Chose of fabric colors and types (I chose three colors
1/4 inch elastic (for gathering of the top of back of the dress)
Bias tape (or you can make your own like I did)

First you want to cut out your fabric pieces. I looked at another dress I have for my little one and based the main front and back piece by measuring and estimating the sizing. Then I cut the bottom piece I needed which ended up being about 40inches long and 4 inches wide (for the ruffle on the bottom). I ended up added another color (black) on the two sides of the dress. Then I also cut out fabric to make bias tape (here is a good tutorial on making bias tape if you’ve never made it before..BIAS TAPE TUTORIAL. )
Take your strap (black piece) and sew it to the top piece and bottom piece. Pattern piece to pattern piece (facing each other) sew the bottom to the strap
then the top.
I made my own bias tape by cutting and ironing the fabric. Then you proceed to use it to line the top of the dress (sew it on!). Then sew up the armholes and long to tie…estimate how long you want the straps to be to tie behind the neck (longer the better!)
Take the back side and sew two black (or whatever color you choose) by sewing
facing pattern sides together
I decided to add a small piece of fabric above the black strap to make it higher . If you want, sew and connect. Then place from and back piece facing each other and sew to connect from and back.
Add elastic to back piece if you want it ruched and tighter.
The last part is the bottom ruffled part.
Hem the bottom first about 1/8inch
To gather your fabric put your machine on the longest thread setting make two
straight lines (Do not reverse!). Roughly 1/4 and 1/8 inch away from the top.
Leave long threads on the ends.
Next you knot the bottom of the back side of the threads so you can gather, just the two in the back (not the front).
Pull the bottom threads from the other end and slide the cloth along the threads toward your knot making small folds. When your cloth has been
gathered the way you want it, knot the ends securely with each other.
Sew pattern side to pattern side all the way around. Then you can zig zag around (or you can zig zag before attaching (this prevents fraying).
Then you are finished! Great Job! Have fun! Post your pics!

Follow
Share

Hooded Dress (Christmas Theme)

So I didn’t want the same old fancy dresses for Christmas that take FOREVER to make and are uncomfortable. Therefore, I strolled around the fabric store looking for inspiration. A tan plaid red and green pattern caught my eye. For some time I have wanted to make a plaid dress for my little one, but haven’t found the right fit. However, today, I thought to myself, “How about a comfy hooded dress in plaid?” And so, the Christmas Plaid dress was born!!!

I designed the dress myself, so be patient with the video since sometimes I change my mind after completing part of the dress. Oh, you’ll see what I mean when you watch it! As always, there is a youtube video tutorial and a written and picture form. The dress pattern is listed below and is a sketch I made of it. There are several sizes on there, but you can always adjust it by measuring your little one or making it bigger or smaller by moving the lines.

What you will need:

The pattern found here–> dress.jpg
Fabric (around 1 yard)
Thread
Sewing machine and scissors
Optional: ribbon, bias tape, buttons, felt, any other decorations, Velcro for hood

Lets get started!

Print the pattern and cut out the right size (note: make sure it is the right size for your little one by measuring)
Cut your fabric patterns out as instructed (decide if you want a hood and if you want it detachable. Also decide if you want long sleeves or no sleeves)
You can serge or zigzag stitch around all the pieces of fabric to prevent fraying.
After zigzaging or serging, sew the top part of the pocket on the main pocket
parts
If you want a button on your pocket sew them on now before you attach it
Next, make sure you align your pockets on the dress front by measuring in from the sides and from the top and bottom to get them as even as possible.
You can either fold your pocket edges and sew either a straight or zigzag stitch around the pocket leaving the top open, or you can just stitch around it as I have done since I liked the look for the plaid dress.
For the hood, have the pattern facing each other on the inside and sew the rounded edge!
Flip right side out and hem or add bias tape to outside
You can sew your hood on fabric pattern facing fabric pattern and sew across and flip right side out, or you can use buttons or velco. You will need to either make button holes or put velcro on the back of the dress to hold the hood. I used iron on velco. Note**If you are sewing it on wait until after you sew the front to back**
The front collar of the dress needs to be hemmed or sew bias tape on it
Next, is to sew the front to back of the dress. If you want the top of the dress to be velcro as well, you can have a jumper (but you wouldn’t have sleeves so skip the sleeve part).
To sew it together, turn patterns facing each other and sew . Also line up sides and pin and sew down underneath the sleeve opening. Then turn right side out.
If you are not doing sleeves, you want to hem or use bias tape on the sleeve holes after sewing down the side. If you are not doing sleeves then hem or use bias tape around the bottom and you are all done!
If you are doing sleeves, turn pattern facing pattern and sew. Then turn right side out.
Sew the sleeve sides together by facing pattern side to pattern inside. Do not sew the curved part as pointed to in the picture below. Then turn right side out
Turn your body of the dress inside out. Have your sleeve right side out. Place your sleeve inside the body with the curved open part lining up with the
armhole. Sew around.
This picture shows that you want the sleeve facing downward inside the body of the dress. the larger end to the hole and the smaller end (where the hand comes out) facing downwards.
You can hem or use bias tape on cuffs of sleeves and bottom of dress. Then add any embellishments you want and wah-la you are done!
Congrats! Feel free to post your pics below!

Follow
Share

1st birthday dress!

I wanted that special 1st birthday dress, but not that especially high price that comes with most of them! So once again, I searched pinterest, etsy, and other sites to find ideas. I ended up combining ideas, as well as making up my own, to design with the dress I created. The theme was rubber duckies for her party. Therefore, I wanted to incorporate duckies as well as other birthday fabrics. I went to the store and examined numerous fabrics, buying a yard of my favorites! The extra fabric I ended up using to create the crowns!

I purchased the iron on birthday 1 and ducky from etsy. The number is even personalized with her name! I also bought the duck buttons from the store. I used white hair bands that I cut to make the loop holes for the buttons on the top of the shoulders.

So how did I make this dress? Well that’s a secret! But I can give you some hints. If you are truly interested in a dress like this you can private message me or come back and look for my future etsy link!

The skirt of course took the longest because of the detail. I added yellow ribbon in between the rows as well.

Then I added the cute duck to the back of the dress. Personally, this dress could be used as a 2 in 1 dress because the back is also so cute! However, the 1 in the front personalized this as a 1st birthday dress.

Well check out the other tutorials, as well as the 1st birthday party theme page for more ideas! Feel free to share pictures of your little one’s first birthday dress!

Follow
Share