Once the drool starts it doesn’t stop! I saw an adorable bandana drool bib in a store and thought, I could easily make that! And you can too! It is a simple 5 to 10 minute project that makes a great gift and a fantastic accent and cute and functional accessory for your little one.
As always, there is a youtube tutorial and the written steps on here! Hope you enjoy!
This is for size 6months to 12months.
What you will need:
1) Two Fabrics (one side needs to be absorbent). I used a cute flannel fabric and then a yellow fleece material for the back.
2) Velcro or snaps to hold it shut
Fold your fabric in half. Cut out two triangles, one with each fabric (you can use my measurements or compare to your bib size for your little one) . I used the measurements of 9in long and 7 1/2in on the fold.
Next, you are going to make a cut for the neckline about 3 inches in from the side
and 2 inches down the fold.
Cut the little triangle off the very end, abut half an inch, this is where the velcro will connect.
Take pattern side facing pattern side and sew all the way around leaving a small
opening around 2 inches (this is where you will pull it right side out)
Now pull it right side out and hand sew the hole shut and VOILA! drool bib
complete!
Iron press it! You can also go around the whole outside and sew it if you like for the design look!
Next you want to attach either your velcro or snaps. I have iron on velcro I used.
Hope you enjoyed this tutorial, if you have questions just post! Thanks
This lovely summer spaghetti strap dress was suppose to be made in time for my sister in laws baby shower in June. However, I was unable to finish it due to my water breaking early and being hospitalized. I finally finished it and love how it turned out! I free handed the design and sizing. I meant for it to end up as a 2t size, but as you can see it’s a bit big! This works out great since its winter and not summertime! She can wear it this upcoming summer. I can’t wait for the warm spring and summer to come! Bulbs and flowers emerging and gardening time, but let’s get back on track.
As always there is a youtube tutorial and this written one. I do not have a pattern as a freehanded it and designed the pattern myself as I went. I used one of my Cece’s dresses to size it and make part of the pattern to guess the sizing.
Unfortunately, a lot of the video tutorial was accidentally videotaped over with my baby boys arrival home (sorry more important anyways!). So I videotaped again trying to explain the best I could. If you have questions please let me know! More great videos to come soon!
What you need:
Chose of fabric colors and types (I chose three colors
1/4 inch elastic (for gathering of the top of back of the dress)
Bias tape (or you can make your own like I did)
First you want to cut out your fabric pieces. I looked at another dress I have for my little one and based the main front and back piece by measuring and estimating the sizing. Then I cut the bottom piece I needed which ended up being about 40inches long and 4 inches wide (for the ruffle on the bottom). I ended up added another color (black) on the two sides of the dress. Then I also cut out fabric to make bias tape (here is a good tutorial on making bias tape if you’ve never made it before..BIAS TAPE TUTORIAL. )
Take your strap (black piece) and sew it to the top piece and bottom piece. Pattern piece to pattern piece (facing each other) sew the bottom to the strap
then the top.
I made my own bias tape by cutting and ironing the fabric. Then you proceed to use it to line the top of the dress (sew it on!). Then sew up the armholes and long to tie…estimate how long you want the straps to be to tie behind the neck (longer the better!)
Take the back side and sew two black (or whatever color you choose) by sewing
facing pattern sides together
I decided to add a small piece of fabric above the black strap to make it higher . If you want, sew and connect. Then place from and back piece facing each other and sew to connect from and back.
Add elastic to back piece if you want it ruched and tighter.
The last part is the bottom ruffled part.
Hem the bottom first about 1/8inch
To gather your fabric put your machine on the longest thread setting make two
straight lines (Do not reverse!). Roughly 1/4 and 1/8 inch away from the top.
Leave long threads on the ends.
Next you knot the bottom of the back side of the threads so you can gather, just the two in the back (not the front).
Pull the bottom threads from the other end and slide the cloth along the threads toward your knot making small folds. When your cloth has been
gathered the way you want it, knot the ends securely with each other.
Sew pattern side to pattern side all the way around. Then you can zig zag around (or you can zig zag before attaching (this prevents fraying).
Then you are finished! Great Job! Have fun! Post your pics!
Looking for an easy homemade nontoxic paint for your little one to be creative? Well, look no further! We experimented with several types of homemade paint and below are our favorite recipes!
Kids of all ages love painting! You can have your little one finger paint, use brushes, sponges, or even potatoes!
So we started off making completely edible finger paint with only a couple ingredients!
Here is what you will need: (this makes enough for about 4-5 different colors depending on how much you want for each)…
1 cup water
1/2 cup of flour
extra water to thin out
food coloring, watercolors, or natural colors such as beet, carrot, tumeric
Instructions:
Place pot over medium heat and pour flour and water into pot and continuously stir the ingredients until it becomes a thick paste.
Take the pot away from the heat when it no longer sticks to the sides
Add cold water to the blob until it reaches the consistency you like and place the amount you desire into separate bowls to color.
Add food coloring, watercolors, natural colorants such as beet or carrot juice, turmeric spice
These can be enjoyed right away or stored in the fridge!!
This paint works well for fingerpainting or sponge painting. You can also use brushes but as you see in the photo, the colors come out thinner and lighter than traditional paint. The color dries on without fading. We used the paint several days in a row.
And who doesn’t love watercolors? The problem with watercolors is that the colors can mix and you only get very small amounts of each color. However, this can all change with homemade watercolor paints!
photo by factorydirectcrafttbsp. baking soda
2 tsp. white vinegar
1/2 tsp. light corn syrup
2 tsp. corn starch
food colors*
containers for storing paints*
something to stir with (toothpicks)
photo from happyhooligans
You can use a muffin pain, disposable cups, egg cartons, or any other container that you aren’t going to use for a couple days.
Instructions:
1)Mix baking soda & vinegar in a cup with a spout. I used my Pyrex measuring glass. Let the kids watch as it fizzes
2) Add in light corn syrup and stir.
3) Stir in the corn starch until well combined. (If it gets too thick, add a little more vinegar.)
4)Pour into your paint containers- not too full, you need room for the food colors.
5)Add the food colors and stir until you reached your desired color!
6) Now if you want them to harden into hockey pucks you have to let them sit almost two days! If you plan on using it right away that’s fine too!
Sponges and potatoes!!
You can cut out designs in potatoes or out of sponges and dip into paint and press just like a stamp! I remember doing this as a child!
You can also use cookie cutters and paint the potato. This picture was taken from Fun stuff.
Dollar store sponges are great to cut out designs for painting!
Since you generally don’t take a baby trick or treating, you don’t want an expensive costume. You also want a costume they won’t immediately pull off or scream because it’s uncomfortable.
So here are 10 costumes you can make for under 10 dollars!
1. For your newborn! Prisoner. Make yourself with a sharpie or sticker. Use a black hat.
You can also use a striped outfit if you have it and a black hat.
2. Biker baby!
3. Harry Potter!!
Picture from tumblr
Just use felt and draw ears on!
4.Popcorn baby holder- how cute! Just buy some felt and glue or sew it together!
Photo is from this placeisnowahome
5. Here’s and idea- Charlie Brown!!! Although I don’t think I’d draw on my baby’s head, still a cute idea. You can use a hat to draw on
Picture from the meta picture
6. I had to include this one since I love Dwightschrute from the office
Picture from meta picture
7. Animals! Animals! Animals!
You only need a white onesie, some disposable nipples and felt! Moooo!
From really awesome costumes. Again, you need felt and some glue or sewing
You can also take advantage of any winter animal outfit you were given! Such as the bear….
Again, green outfit and some felt. You need a green hat and either fake eyes or make your own!
8. Garden nome
Costume-works
9. Farmer! Overalls and a straw hat! I had a toy hat I used!
10. Gum ball machine! All you need is a hat and glue or hot glue on colored cotton balls! You need the red shirt and black pants.
This one is cute too so I put it in…ghost! You need a white nightgown and felt
I don’t know about your little one, but mine sure does love to read! Well at this age, it is more like browse through the pages and pictures! She sits by the book shelf and pulls out book by book looking at each page.
At first I thought maybe I should purchase her a bean bag chair, and then I thought, well lets just make one! This can also be a great gift for anyone! I actually sometimes sit in it too (shhhh!)
So of course I have the video tutorial on youtube below and then the written and picture tutorial below that. Let me know if you have any questions!
What you need:
Fabric (you can use two or one color) 2 yards total of each color (or 4 yards of one color)
A 24 inch zipper (or you can use velcro or buttons)
4 yards of muslin or cheap fabric
Bean bag filling (100L) (I couldn’t find a large bag at my local craft store so I bought mine on amazon with free shipping)
Make panels of 40×16 inches. You should do 6 outside (3 of one color and 3 of the other color) and 6 inner panels.
Take one of your panels and fold once long way and once width. Have your fold on top and side when measuring to cut. Measure bottom to 6 inches (the long side) and start a curve and cut right up to the right corner. See picture below.
Line up two inside pieces and sew up and down one side. I did this twice for more strength. For the outside you will have the patterns facing inside towards each other and sew.
Once sewn open the panel up. Then place another panel on the original piece and sew the opposite side (you will end up with three pieces sewn together)
Then sew the other 3 inside pieces together and you will have two sets of three.
Take the two sewn together pieces and face pattern side in (doesn’t matter with the inside bean bag layer) and sew all the way around the outside leaving a couple inches hole.
Turn right side out. Then you will put the bean bag filling it! Ah what a challenge!
Note: I did not completely fill and sew this until I was sure the outside would fit over properly. I waited to finish this until the end of the project.
Take one of your outside panels and face the zipper down on the pattern. Line it up on your machine and sew the zipper on.Take one of your outside panels and face the zipper down on the pattern. Line up the right outside part of the zipper to the outside of the panel (as shown) and sew the zipper on.
See the video for more of a demonstration on how to attach a zipper
Sew pattern and right side of the next panel to zipper right sides facing each other (inside) and sew together.
Line up the part below and above the zipper with patterns facing each other and sew
Then sew your 3rd panel on…complete another 3 panels together as done with the inside pieces.
**Open your zipper all the way. Take each 3 piece panel set and place them facing each other (inside) and sew all the way around the edges. Do not leave a hole this time, you will pull it out through the zipper opening!
Next you will place your inside bean bag that is partially full inside. If its full then you are done! However, if you partially filled…continue to fill all the way and sew the inside bag shut.
Congrats you are done! Enjoy! Post your pics below!
I have a nephew who absolutely loves trucks, cars, and any other type of vehicle. As Christmas approached I was unsure of what to get my nephew. I searched the internet for ideas of sewing projects with trucks, but it was only to my dismay. None of the projects peaked my interest. I found a car tutorial but that was it. So I decided to make my own pattern and tutorial on a truck pillow. I also decided that putting his name on with iron on letters would be fantastic!
As usual, there is a video tutorial on my youtube site, and written instructions with pictures below.
What you will need:
*Your choice of fabric colors
*poly-fil or any type of stuffing
*Choice of thread colors
*Optional: Iron on letters
Pattern: Use one whole piece of printer paper 8x10inches as the trailer part. Make a circle for the wheels. And make a from cab as you like. The pattern I made is so easy I’m not even going to try and retrace it and scan it and turn it into a pdf because it takes much longer…if you are really having issues please let me know and I will take the time do that for you.
Cut out your fabric pieces
Iron on letters or if you want to sew on letters that works as well!
Sew on your hubcaps, windows and any other details you want to add
Sew each side together. The front cab to the trailer and the wheels
Time to sew the middle strip part! I made mine 2 inches thick but you can make it as big as you like!
You can switch colors to match or just use one color.
If you do not want to do the middle section then you can just take the two truck sides facing each other (inside) and sew around leaving a 3 inch opening. Turn right side out, stuff, and hand-sew shut.
To do the middle strip, line it up with the truck where you want to start and back-stitch and go forward all the way around switch colors as needed. Curve the middle strip around the corners.
Now take the other side of the truck and have the sides facing inwards towards
each other, and sew the second side to the strips on the first side.
Turn right side out and make sure there are no holes in the outside, if there are turn inside out and fix them.
Fill with your choice of stuffing and hand-sew shut.
Congrats you are done!
If you have any questions or concerns please leave them below. If you have trouble with the middle strip please watch the youtube tutorial.
Cece bear loves to pull toys out of baskets and put them back in. She also likes to build blocks and figure out other puzzles. So I thought to myself, what can I make for Christmas that she can play with? And a mini Christmas tree came to mind. Eventually, I figured out a felt Christmas tree with all sorts of sensory stimulation and Velcro ornaments would work! So I decided to get to work.
I decided to make three trees, one for each of Cece’s friends. It also made a great birthday gift for her friend Kyle’s first birthday! This is a great activity to do with older children as well. They can make their own ornaments and decorate the tree! There are a variety of ways to put the tree, ribbons, buttons, and ornaments together. The two I used were sewing and hot glue gun, but you can do one or the other as well. Just make sure if you have a baby, infant, or toddler, to make sure everything is very secure so they can’t pull it off!
As always, there is a youtube video and written steps and pictures. Feel free to add your own creativity and pizzazz!!!
If you have an older child, instead of using velcro to stick the ornaments on, you can use string or twine looped on the ornament and they can put them around buttons on the tree!
What you need:
*Green felt fabric (I used 1.5
yards for three trees)
*velcro
*Brown felt fabric (stump)
*Felt fabrics of various colors for
ornaments of your choice and design
*optional: buttons, ribbons,
and other accessories
1) Fold your green felt and make a tree outline on the fold (so half of it traced on). Then cut your tree out!
2) Next, if you want a stump, use brown fabric to cut one out! Once again you can trace it out. You can either sew it on the bottom or hot glue gun.
3) I wanted to make something to hold the ornaments besides just having them stick to the tree. So I decided a present with the child’s name on it would be perfect! So next I chose a color of felt I had and cut about 11x 7 inches.
4) Next, for one of the presents I made I wanted the bow long ways down so I sewed a piece of ribbon straight down the piece. (the other two I made have it across the box which you can sew on now or later)
5) The next step would be to turn it right sides facing inwards and sew to the length you want so you have the top of the present flap long enough. Check out the picture to see what I mean. Then turn right side out.
6) As you can see, I decided to iron on letters for the name of the child. These two presents are different sizes. Also, if you want to put a piece of iron on or sew on or glue gun on Velcro to the top of the present to have it stick now is the time.
7) Then decorate the present at will. I added some adhesive Rudolph stickers. I did hot glue them so they would be more secure.
8) Follow that, I sewed the present onto the tree. This is optional, you can have it separate or not have a present at all. I opened the top flap and sewed right along the fold to the tree. You can also hot glue gun it.
8) Now, back to the tree. Now is the time to get even more creative! Use ribbons, garland, buttons, or whatever you want on the tree! You can sew or hot glue gun them on. If you have an older child and want to have hanging ornaments on buttons then align your buttons!
9) Next, it is time to make ornaments. If your child is older they can help decorate and make ornaments. I chose actually Christmas items and one ornament and one light bulb. I used whatever felt scraps I had to make them. I also made a star at the end. Remember to Velcro your ornaments on the back using the hard side of the Velcro. You want to iron them on before you decorate the front! Otherwise you might melt or damage your decorations.
To hang the tree, I used 3m adhesive strips, but I have heard that the blue paint tape works well on walls. You can also use suction cups if its on the window or door. Ok enjoy! Feel free to post your tree below!
One day I put my little munchkin down to nap and a couple minutes later I go to check on her and she is gnawing the crib side rail! And you know how expensive cribs are, so I was not a happy camper. I was also concerned about the stain getting in her mouth. So, I got right to work making a crib rail cover and protector! So far, she has only gnawed on the one rail, and that is because this rail faces the hallway that she enjoys looking out and crying to see if anyone will come to her rescue!
This is a simple project that should take no more than 15 to 20 minutes. As always, I have a Youtube video and a written and picture explanation.
What you need:
Fabric with your chosen pattern
Batting (fleece or any type of padding)
Ribbon
Measuring tape
First you want to measure your crib rail that you will be making this for. Measure the inside from side to side for the length and then the width and add 2 inches (or measure downwards for how long you want it to go down).
Also measure where your ties will tie onto your railing. Mark this all down so you remember.
Then cut the length and width of the fabrics and also cut your ribbon. Now you may want to make your ribbon longer for bigger bows but keep in mind your little one may pull at them if they are too long. I recommend about 6-8 inches long. I used 6 pieces of ribbon (so 3 ties) total for the side rail.
Pin your ribbon onto your batting facing inwards. Have the two ribbons across from each other and make sure to measure out the spots. Pin them down with the shiny side or pattern side up.
Line up your other fabric piece with right side down (right sides facing eachother).
Now you want to sew all the way around the edges leaving a 2 to 3 inch opening. Make sure you backstitch!
Pull the inside out and make sure the corners are popped out. Then sew this area shut.
You are done congrats! Go put it on and save your crib!
I wanted that special 1st birthday dress, but not that especially high price that comes with most of them! So once again, I searched pinterest, etsy, and other sites to find ideas. I ended up combining ideas, as well as making up my own, to design with the dress I created. The theme was rubber duckies for her party. Therefore, I wanted to incorporate duckies as well as other birthday fabrics. I went to the store and examined numerous fabrics, buying a yard of my favorites! The extra fabric I ended up using to create the crowns!
I purchased the iron on birthday 1 and ducky from etsy. The number is even personalized with her name! I also bought the duck buttons from the store. I used white hair bands that I cut to make the loop holes for the buttons on the top of the shoulders.
So how did I make this dress? Well that’s a secret! But I can give you some hints. If you are truly interested in a dress like this you can private message me or come back and look for my future etsy link!
The skirt of course took the longest because of the detail. I added yellow ribbon in between the rows as well.
Then I added the cute duck to the back of the dress. Personally, this dress could be used as a 2 in 1 dress because the back is also so cute! However, the 1 in the front personalized this as a 1st birthday dress.
Well check out the other tutorials, as well as the 1st birthday party theme page for more ideas! Feel free to share pictures of your little one’s first birthday dress!
Want to sew quick and easy crowns for a party or get together? Then you’ve come to the right place! I made a last minute decision days before my daughters’ first birthday party that we needed crowns! The theme was rubber ducky, so I decided to make birthday crowns instead of hats! Young kids and babies don’t enjoy hard hats on their head and also shouldn’t have a rubber band or elastic around their neck.
As you can see they are very cute for photo shoots as well! She didn’t particularly like keeping it on, but I got a couple good shots!
As usual, there is a YouTube video and also a written explanation below. I didn’t have a lot of time to embellish the other crowns but you can always spice things up with some ribbons, bows, glitter, rhinestones, or buttons!
To get started you need:
1) Choice of fabric and design
2) Scisscors
3)Thread
4) Closure for crown (velcro, button, ribbon) or you can sew all the way around if you know the exact size
Cut your fabric for the main part of the crown 4 1/2 x 18 inches
Make your own crown pattern by drawing the top on a piece of paper and cutting it out!
Cut your design onto your fabric to make the shape of your crown! If you want a felt backing with another color cut that out as well.
Next, pick out your ribbon if you are using one, if you want any other embellishments get them ready! I made a felt duck that I sewed onto
the crown.
Line up your crown pieces and sew all the way around! Then you are done! If you want to add button loops and buttons you can sew them on as well.
Congrats and enjoy the party! Check back often for new crafts or subscribe below!
Once the drool starts it doesn’t stop! I saw an adorable bandana drool bib in a store and thought, I could easily make that! And you can too! It is a simple 5 to 10 minute project that makes a great gift and a fantastic accent and cute and functional accessory for your little one.
This is for size 6months to 12months.
